Einleitung
Kratzer in Brillengläsern können das klare Sehen verhindern. Wie du solche Kratzer in der Glasoberfläche behandelst und bestenfalls wieder verschwinden läßt, findest du in den folgenden einfachen Schritten.
Werkzeuge
-
-
Entferne jeglichen Schmutz oder Rückstände auf den Brillengläsern mit einem weichen Reinigungstuch.
-
-
-
Poliere das Wachs auf die Linse mit einem fusselfreien Lappen, hierbei ist es wichtig kleine kreisförmige Bewegungen zu machen. Sofern keine Kratzer mehr zu sehen sind, bist du fertig. Denke daran, dass es bis zu 5 Minuten dauern kann, bis das gewünschte Ergebnis sichtbar ist.
-
-
-
Benutze lauwarmes Wasser und spüle die Brillengläser für etwa 10-15 Sekunden, um alle Wachsreste zu entfernen.
-
Um deine Brillengläser zu trocknen und die eventuellen Wachsreste zu entfernen, empfiehlt es sich, ein sauberes Tuch zu benutzen.
-
Bei besonders tiefen und hartnäckigen Kratzer muss diese Prozedur möglicherweise mehrfach angewendet werden.
18 Kommentare
thank you, i have a scratched lens and will try this. cheers.
amackay5 -
Stupid is as stupid does! Think about it. A scratch is a certain width, when you polish it you are just grinding off the edges of the scratch and actually making it wider. So unless you are capable of removing all the surrounding material to the depth of the deepest part of the scratch AND maintaining the profile to within a very very small tolerance then this just WILL NOT work. Filling the scratch with wax cannot work either as wax does not have the same refractive index as the lens material. Conclusion: take care of your glasses and if you are careless enough to damage them it's your own fault, accept responsibility and replace them.
abscomm -
This sounds like "I've not tried this but I've thought about it for a few minutes and this is what I think will happen". Very short on evidence.
steve -
Wow!!! Just couldn’t help yourself could you. Perhaps you’ve heard “If you can’t say something nice say nothing at all”! Grow up without doing it at someone elses expense.
Yaya -
Obviously, this person has never made a mistake and is absolutely perfect in every way.
Wrong concept in your mind. Wax fills and doesn’t take away any “edges”. Like it does on your car. Makes it look better by filling small scratches. It works. I think you might be thinking along the lines of using an abrasive to polish. That’s completely different than WAX. Wax fills…not removes.
A Day -
I appreciate your honest evaluation, however I'd like to know if it is an assumption or have you actually experimented?
From your technical language I would think that you're correct, but your perception regarding damages as being a result of irresponsibility makes me question your comprehension of facts.
Actually, abscomm, this isn't POLISHING, it's WAXING which is completely different. POLISHING uses a fine grit to buff the surrounding areas to match the depth of the scratch (Turtle Wax brand has a polishing clay but this isn't talking about that) while WAXING uses WAX to fill in scratches. I was stupid and used TP to dry my glasses bc I was too lazy to go downstairs and find my glasses case with my cloths and they got a lot of really fine scratches. I found this site, tried Turtle Wax, and now ALL of the fine scratches are filled with WAX and buffed with my correct lens cloth to an even, shiny surface and they work fine now. The scratches were so fine that the refractive index (you're so fancy) of the wax doesn't make a difference because it's better than the refraction that occurs when there are scratches even if the scratches were bigger. However, if they were bigger it wouldn't be worth trying because you couldn't see through but mine were about 1/10 of a hair each so this worked great.