Einleitung
Werkzeuge
Ersatzteile
-
-
Use a plastic card while applying alcohol to the edge inserted in the device
-
slowly slide the alcohol-covered card around the device make sure to cover all sides and slide through all alcohol while applying small amounts of pressure up to pry the glass off.
-
-
-
Unscrew the 6 screws holding down the wireless charging bracket
-
Carefully remove the bracket without tearing the wireless charging pad
-
Disconnect the wireless charger
-
-
-
disconnect the battery and all highlighted flex cables
-
remove the 7 screws holding down the plate containing the loud speaker
-
remove the plate
-
-
-
Pry up edge (mine was left side) with isesimo, fill battery socket with alcohol, slowly pry battery while letting the battery come out on its own
-
-
-
remove the three screws and remove the two 5g antennas
-
apply small amount of heat, and remove buttons
-
To reassemble your device, follow these instructions in reverse order.