Einleitung
Werkzeuge
-
-
Place the device face down.
-
Use a T15 Torx screwdriver to remove the six screws in the base plate.
-
Lift the base plate off of the device.
-
-
-
Flip the circuit board over to the right.
-
Gently pull the ribbon cable outward to disconnect it from the circuit board.
-
-
-
Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.
-
Remove the circuit board.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
