Lenovo IdeaPad 100s-14IBR USB/Headphones Jack Replacement

Geschrieben von: Mohammed Younis
  • Kommentare: 0
Lenovo IdeaPad 100s-14IBR USB/Headphones Jack Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

6 Minuten

Einleitung

This guide will help the users replace the USB/Headphone Jack board that is found in the Lenovo IdeaPad 100S-141BR.

  1. TflRfKMYeZlXaGFJ

    • Remove the eight 4mm PH00 screws.

    • Remove the four 2mm PH00 screws.

  2. CpOQgSbrcp6uGodG
    CpOQgSbrcp6uGodG
    gnJeJEo3uHTTCfq2

    • Use the nylon spudger to loosen the back cover from the back of the device.

    • You may hear a bit of a snapping sound, but this is normal.

  3. SW3FUXtwJIOJFLWi

    • For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.

  4. Z1JmLm16NeHxWmKB

    • Remove the three 4mm PH00 screws.

    • Unplug the ribbon wire connected to the USB/Headphone Jack PCB by lifting the black plastic tab holding the ribbon cable down.

    • Be extra careful not to bend the ribbon cable too much as it is fragile.

  5. 1rFNp4fhM2AlkqsC
    1rFNp4fhM2AlkqsC
    oS2xtAynpDWymeCV

    • Lift the USB/Headphone Jack PCB off of the board gently and put it to the side.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Mohammed Younis

Mitglied seit: 18/03/19

421 Reputation

0 Kommentare