IBM ThinkPad T42 Modem Daughter Board Replacement

Geschrieben von: Gerald Watanabe
  • Kommentare: 3
IBM ThinkPad T42 Modem Daughter Board Replacement

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

20 - 25 Minuten

Einleitung

This guide will demonstrate the removal and replacement procedures for an IBM ThinkPad T42 Modem Daughter Board.

  1. nOVTwh1ZZiXj2xdv

    • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

  2. XSANOcwcEWryUkJN

    • Unscrew the 2 Phillips screws on both sides of the T42's rear.

    leave these four screws alone. No need to remove them.

    fredwb -

    Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

    wbcam -

    There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

    The dark red circles are not very easy to see. How about white ones?

    mattikaki -

  3. iuUeFsBx4Wrj2uXb

    • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

  4. GTJtY3mGQRbaQ12t
    GTJtY3mGQRbaQ12t
    wTbnWCPMvL2LQsAX

    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

  5. 6i5PGa2yL6aGxTrg
    6i5PGa2yL6aGxTrg
    CIGycC2sHsirWPHs

    • Starting from the bottom right, carefully remove off the bezel. Use a spudger or flat head screwdriver if needed.

  6. i1vLytFH32QeZQdS
    i1vLytFH32QeZQdS
    vcquRAQcS1PEJSrQ

    • The metal bracket will now be free to move, grasp it and remove it from the device.

  7. eXCF6BnLTV545WJu

    • Remove the small rubber piece that is covering the T42's microphone,

  8. TZyJRBSGvZgp4QE2

    • Next, unscrew the 3 Phillips screws in red.

  9. M4EjkpKliLAGpicG

    • The cables are routed through different components for organization, carefully disconnect them, unwrap them and pull the card free.

  10. 1btxqaPaEwWhc4vS

    • Lastly, remove the bracket sitting beneath it.

    • The end!

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Gerald Watanabe

Mitglied seit: 14/04/10

201 Reputation

0 Kommentare