How to open the Huawei Watch GT 2 (46 mm)

Geschrieben von: Dominik Schnabelrauch
  • Kommentare: 0
How to open the Huawei Watch GT 2 (46 mm)

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

Use this guide to open your Huawei Watch GT 2 (46 mm) for repairs.

  1. ilVxkpVKgnI2Ev5G

    • Before starting repairs, take your watch off the charger and power it down.

    • Remove the watch band.

  2. iqQMELJhICcegBUY

    • Remove the four 3.7 mm-long Torx T2 screws.

  3. V5XxdHQuZTVHMMMR
    V5XxdHQuZTVHMMMR
    3QZLp2OxOsOiJCBt

    • Insert the edge of a spudger into the middle loudspeaker opening at the top edge of your watch.

  4. XlCRrBMNGKgH2RaQ
    XlCRrBMNGKgH2RaQ
    dJGSvCUKHPBwBEkR

    • The plastic clamps holding the back cover in place sit very tight and may require some force during the prying procedure.

    • Use the spudger to pry up the back cover assembly of your Huawei watch GT 2.

    • Don't try to remove the back cover assembly all the way yet, it's still connected to the motherboard.

  5. DMO5iwerreCkJ63l
    DMO5iwerreCkJ63l
    nNnXovmc2KQN2EYv

    • Carefully swing the back cover assembly open to an upward position.

Abschluss

To reassemble your Huawei Watch GT 2 (46 mm), follow these instructions in reverse order.

Opening didn’t go as planned? Check out our Answers community for troubleshooting help.

Tinte & Feder

Dominik Schnabelrauch

Mitglied seit: 23/11/16

125125 Reputation

0 Kommentare