HP iPAQ h4155 Back Case Replacement

Geschrieben von: John Pagliero
  • Kommentare: 0
HP iPAQ h4155 Back Case Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

5 Minuten

Einleitung

This step-by-step guide illustrates how to remove and replace the back case of a Pocket PC.

  1. Upv2uOgRofWIZLid

    • Slide the silver release tab up and simultaneously lift the cover up from the left side.

  2. HDprHUJ2VGQyPJNX

    • Push the tab from left to right to remove the cover.

  3. WRiwBpkNWER5SSxE

    • Now lift the battery up and away from the device to remove it.

  4. vfkeXmnIYFE3ivBe

    • Remove the four silver screws (T5 x .25 in).

  5. rOVcOI11Dy2TFvJq

    • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

  6. lFYU3Js11pFxWMQW
    lFYU3Js11pFxWMQW
    uxWGyOijWFvTiYaN

    • Next, use your plastic removal tool to separate the gray back from the black center piece.

    • For better results, start the separation at the corner piece.

  7. FGQhLS6W4WegB1aP

    • Remove the back case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

John Pagliero

Mitglied seit: 27/01/11

942 Reputation

0 Kommentare