Giant Reign 2 Rear Shock Replacement

Geschrieben von: Andrew Krasts
  • Kommentare: 0
Giant Reign 2 Rear Shock Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

10 - 20 Minuten

Einleitung

Installing the rear shock.

  1. RDCHgaDLFhBVJ4vR

    • Orient the bike upside down.

  2. ZQoUidPQNaPS6VPg

    • Remove the 10mm screw and take the bash guard off of the frame.

  3. FH5wX5rL1RGqNdZr

    • Remove the 65mm screw that connects the bottom of the shock to the frame.

    • As shown in the blue box, you will need to use a wrench to hold the other side.

  4. UGuHbxjfPBSTPeQ1

    • Remove the 40mm screw that connects the shock to the link arm of the suspension.

  5. Q1WpgMYTQKHcXsPm
    Q1WpgMYTQKHcXsPm
    fYdJFdFlA2yxPdYd

    • Push the shock out of the brackets mounting it to the frame and suspension arm.

    • This may require some force and slight wiggling from side to side.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew Krasts

Mitglied seit: 05/10/12

302 Reputation

0 Kommentare