Einleitung

The camera shell is the plastic casing that makes up the outside of the Fujifilm Instax Mini 8; which is meant to hide wires, protect the film, and hold the main components of this camera together in a compact manner. A damaged shell will compromise the integrity of the device and may cause other parts of the camera to malfunction.

  1. CVMfpJGRVTSfiQRX
    CVMfpJGRVTSfiQRX
    vRvFGMsDsTY2BU2Q
    VhDO2ZXoIwPZwaPu
    • Start off by looking at your camera and rotating it to locate all the screws. There should be eight screws in all.

    This doesnt show it but there is a screw under a plastic "pop out" cover where the photo comes out at the top

    Margaret Compton -

  2. sE6BCCnTQnevPvuN
    sE6BCCnTQnevPvuN
    gPViBE4P1xVjOpbr
    r2SAKjOwYNUfBKie
    • Press the tab down in order to unlatch the film compartment cover.

    • Remove the film from the compartment (if any is present)

    • Remove the compartment cover completely.

    • Begin by using the small #00 Philips head screwdriver and turning at a counter-clockwise fashion to remove screws.

    How do i remove the compartment cover?

    lucy jane holman -

  3. t63uvOCcZbv5XqSG
    t63uvOCcZbv5XqSG
    opZxhSGmIkDHxQDf
    5nKxbmkb4gPuEcjP
    • Use the plastic opening tools and spudger to safely remove the front shell casing.

  4. 4uhDYfkCsM2xEGJh
    4uhDYfkCsM2xEGJh
    Yrjim3pndPyMV1eb
    • Lift the front part of shell up, assuring not to pull too hard due a spring that is connect to the shell and the inside of the camera.

    • Carefully, using a small #00 Philips head screwdriver, remove the spring from the inside component of the camera.

    • At this point you should have the shell removed completely. Congratulations! Repeat the steps backwards to get the shell back on your camera unit.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Boyang Wu

Mitglied seit: 02/10/12

857 Reputation

15 Kommentare

For removing initial screws, there are 9 screws. The 9th screw is under the cover overlying the exit of the Polaroid film area. (hidden under the cover)

princesslsy -

but where near the exit? i cannot find it

Emily Birkler -

It's at the top of the camera where you get picture.

xxx -

I need the circular yellow plastic piece that goes around the lens. How can I obtain that? How do I attach?

jason81173 -

I've drop my instax mini 8 at the airport and it looks perfectly fine at first until I realized that the film compartment has broken and it can't close its 'door', but the instax still can be use just need to press the door against the film everytime I used which is annoying. Does anyone know how to fix it?

Siti Syuhanna hussein -

Did you find the replacement part?

Alber Einstein -

I accidentally got sand under the shutter while I was at the beach, and now the button won't click. How do I fix this?

Julie v -

where do i find the circular plastic piece online how do i find it? what website? what shop?

albert instine -

Lens cover, over front of lens, fall off How do i put back on. Fuji instax mini 8

Marie M -

pls help. battry leak. corrossion. forgot to remove. 1x use palang. what can i do?

Gie Britanico -

you can use vingear and cotton buds to clean the white stuff and then wipe with alcohol; goog;e clean battery leak in youtube then you will know what to do

kit kat -

That final spring is broken on my camera. Do you know what the specs of it are so that I could get a replacement?

Jack Murgatroyd -

HI Jack, I have the same issue, where did you find the spring at the end and what are the specs?

kit kat -

hi i lost the spring to the outershell. where can i buy the replacement and what size of the spring should i get?

kit kat -

The mini 9 has one extra screw. You need to pop off the ‘frame’ at the top around where the picture comes out. There is one more hidden screw there.

Neil -