Einleitung
Autofocus bearings were stuck, I could only focus between 0 to 0.5m.
This guide will roughly show you how to reach a part which moves the lens and makes it to zoom and focus.
Werkzeuge
-
-
Unscrew the top part and detach it.
-
Unjoin cables. Be careful; they're delicate, and easily torn.
-
Unfasten the screws that hold the circuit board in place, and separate it from the rest of the lens assembly.
-
-
-
Keep unscrewing and removing the parts until you reach what you need to fix.
-
Zoom bearing can be taken away by unscrewing its srews.
-
-
-
Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.
-
When you finish you can put all back together
-
To reassemble your device, follow these instructions in reverse order.
