Dell XPS 13 Rückabdeckung austauschen

Geschrieben von: Ella Herrmann

Kommentare: 10

Schwierigkeitsgrad

Einfach

Schritte

Zeitaufwand

5 Minuten

Einleitung

Hier wird der Austausch der Rückabdeckung am Dell XPS 13 gezeigt.

Werkzeuge

Schritt 1

Entferne acht 4 mm Torx T5 Schrauben von der Rückabdeckung.

Missing a step about removing the tiny Phillips head screw under the XPS flip up cover in the middle. Also, there are hooks all the way around the cover so it doesn’t simply lift off.

curtis_p_brown - 04/11/17

What about step 3???

Peter Hecht - 03/09/20

Please dont hurry , take your Time to follow this procedure. It takes 20 min (not 5) and step 4 requires half of this Time. Good luck.

Peter Hecht - 03/09/20

+1 Peter Hecht is right - getting the little clips the back is snapped on with is time consuming and a bit fiddly for people not used to “spudging” off covers. Starting from the back is the key those come loose much easier and help with the rest

Doug Steinschneider - 15/10/20

Schritt 2

Heble mit einem Plastiköffnungswerkzeug die mit "XPS" markierte Klappe in der Mitte auf.

No flap or screw on the XPS 9370, just a press-fit latch at the centre of the cover. This can be gently prised off.

Alan Thomas - 03/02/21

Schritt 3

Entferne die einzelne Kreuzschlitzschraube unter der Klappe.

Schritt 4

Heble mit Plektren oder einem Plastikwerkzeug die Gehäuseklammern auf. Beginne dabei an der hinteren Kante.

It’s not that easy to lift actually, cause there are latches. Had t release them gently all around beforehand.

Davit Barbakadze - 21/09/17

Also there’s one additional screw under that plate on the bottom!

Davit Barbakadze - 21/09/17

Maybe the later models are different, since it should be from the front: https://www.youtube.com/watch?v=xFIE2SKs...

shigmas - 11/05/20

Very difficult step, Proceed very carefull

Peter Hecht - 03/09/20

If you are replacing the battery of a 9360 or latter (2016 onward) make sure to do the FRONT first. There are latches on the back that you may break if you try to force it open that way. After prying up the front and the sides, just lift up the front like you would open a hinged box. You shouldn’t feel that much resistance as the back hinges off towards you after you’ve lifted it around 30-40 degrees.

Giacomo P - 12/12/20